Doc. 065031-04 1/08 339
EG Specifications
A.7 Electrical
A.8 Environmental
A.9 Physical
Main Power
Requirements
90 to 264 VAC, 47 to 63 Hz (Auto-sensing power supply; no
manual voltage or frequency adjustment required)
Typical input power: 18 W
Maximum line draw: 1 A at 110 VAC
Fuse
Requirements
Two IEC 60127-2 slow-blow fuses (P/N 954773) rated at 2 A,
250 V
Operating
Temperature
4 to 40 °C (40 to 104 °F)
Operating
Humidity
5% to 95% relative humidity, noncondensing
Operating Pressure Minimum: 14 MPa (2000 psi)
Maximum: 21 MPa (3000 psi)
Dimensions Height: 40.6 cm (16 in)
Width: 22 cm (8.75 in)
Depth: 55.9 cm (22 in)
Minimum required clearance behind the EG: 5 cm (2 in)
Weight 18 kg (40 lb)
To Next Page
Loading...
