8 • DP/SP Troubleshooting
Doc. 065031-04 1/08 191
This error occurs if you enter an invalid value for the DP/SP flow rate in
Chromeleon or Chromeleon Xpress.
To troubleshoot:
Select a flow rate within the DP/SP flow rate range (0.001 to 10.0 mL/min).
This error occurs if the DP/SP leak sensor detects a liquid leak inside the
enclosure. When this error occurs, the pump stops running.
To troubleshoot:
To find and eliminate the source of the leak, see Section 8.15
.
Invalid flow value.
Leak detected.
To Next Page
Loading...
