ICS-3000 Ion Chromatography System
216 Doc. 065031-04 1/08
2. If the error appears again, contact Dionex for assistance. The detector
electronics may have malfunctioned.
NOTE The ICS-3000 Ion Chromatography System electronics
components cannot be serviced by the user.
This error occurs when the cable on the working electrode is disconnected
from the cell electronics.
To troubleshoot:
Check the cable connection: Verify that the signal cable from the working
electrode is connected to the detector block (see Figure 8-4
).
Figure 8-4. Electrochemical Detector Connection
ED cell 1 working electrode disconnected.
-or-
ED cell 2 working electrode disconnected.
Push here to ensure the detector’s
electrical connection is secure.
To Next Page
Loading...
