5
5-34
Connectrix DS-32M2 User Guide
Configuring the Switch
Creating New Alerts
Follow these steps to create a new threshold alert:
1. Click Configure on the Product Manager menu bar and select
Threshold Alerts on the drop-down menu.
This displays the Configure Threshold Alerts window
(Figure 5-20).
Figure 5-20 Configure Threshold Alerts Window
If alerts are configured, they appear in table format (as shown in
Figure 5-25 on page 5-39), showing the name of the alert, type of
alert (Rx, Tx, or Rx or Tx), and alert state (Active or Inactive).
2. Click New.
This displays the New Threshold Alert window (Figure 5-21).