C
Configuring User Rights
C-21
Configuring the Switch from a Web Server
Configuring User Rights
The operation described here allows you to to configure the
administrator-level and operator-level passwords (as specified by the
customer’s network administrator) used to access the Embedded
Web Server application.
1. On the Configure window (Figure C-3 on page C-7), click the
User Rights tab.
This displays the window in Figure C-12.
Figure C-12 Web Server Interface — Configure User Rights
2. In the New User Name fields, enter Administrator and Operator
names of up to 16 alphanumeric characters each.
3. In the New Password fields, enter passwords of up to 16
alphanumeric characters each.
4. Enter the same passwords in the Confirm New Password fields.
5. Click Activate to save the information.
To Next Page
Loading...