6
6-4
Connectrix DS-32M2 User Guide
Using Logs
Audit Log
The Audit Log displays a history of all configuration changes applied
to the switch from any source such as Product Manager, SNMP
management stations, Web Server interface, host, or another switch.
Figure 6-2 Audit Log
The log provides this information:
◆ Date/Time — The date and time of the change on the switch.
Some actions, such as backing up configuration data and enabling
automatic date/time synchronization, are performed only by the
Connectrix service processor without switch interaction. These
actions are indicated by the string
Connectrix Manager
following the audit log’s stamp of the Connectrix service
processor’s date and time. If the string
Connectrix Manager
does not appear, the time stamp is from the switch.
◆ Action — User action that caused the configuration change, such
as offline status, port name change, or change of address.
DS-32M2 - Test 35: Audit Log
140.150.60.70
140.150.60.70
165.150.122.65
165.150.122.65
144.96.120.120
140.150.60.70
140.150.60.70
144.96.120.120
144.96.120.120
144.96.120.120
144.96.120.120
144.96.120.120
144.96.120.120
144.96.120.120
140.150.60.70
To Next Page
Loading...