5
Configuring Threshold Alerts
5-37
Configuring the Switch
Figure 5-23 New Threshold Alerts Window — Third Screen
10. Select either Port Type or Port List.
• If you select Port Type, selecting either E_Ports or F_Ports will
cause this alert to generate for all ports configured as E_Ports
or F_Ports respectively.
• If you select Port List, you can select individual ports by
clicking the check box by each port number or set all ports.
Selecting Set All Ports places a checkmark by each port
number. Selecting Clear All Ports clears the checkmarks by
each port number.
11. Click Next.
A final window appears to provide a summary of your alert
configuration. To make any changes, use the Previous/Next
buttons to move backwards and forwards through the
configuration windows.
To Next Page
Loading...
