EMC Connectrix DS-32M2 - Appendix C Configuring the Switch from a Web Server

Configuring the Switch from a Web Server
C-1
C
Ivisible Body Tag
This appendix describes the procedure for configuring the DS-32M2
from the Embedded Web Server if the switch does not have access to
a Connectrix service processor. The appendix contains these sections:
• Introduction .......................................................................................C-2
• Configuring Switch Ports.................................................................C-7
• Configuring Switch Identification..................................................C-8
• Configuring the Date and Time ....................................................C-10
• Configuring Operating Parameters.............................................. C-11
• Configuring Network Information...............................................C-14
• Configuring SNMP Trap Message Recipients ............................C-16
• Configuring Zoning........................................................................C-18
• Configuring User Rights................................................................C-21
Configuring the Switch
from a Web Server