To Next Page

To Previous Page

A-12 Connectrix DS-32M2 User Guide

Using SNMP to Manage the Switch

Accounting: Class 1

The Fcfportc2accttable contains Class 1 accounting information for

each F_Port in the fabric element recorded since the management

agent initialized.

Table A-2 Accounting Class 1

Variable Description

fcFxPortC1AcctModuleIndex This object identifies the module containing the F_Port for which this entry contains

information. This number ranges from 1 to

AS_glob.prod_cnfg_ptr->max_nbr_modules.

fcFxPortC1AcctFxPortIndex This object identifies the F_Port within the module. This number ranges from 1 to

the value of fcFeModulePortCapacity for the associated module. The value

remains constant for the identified F_Port until the module is re-initialized. This

number ranges from 1 to AS_glob.prod_cnfg_ptr->ports_per_module.

fcFxPortC1InConnections The number of Class 1 connections successfully established in which the attached

NxPort is the source of the connect-request.

This value is fixed at 0.

fcFxPortC1OutConnections The number of Class 1 connections successfully established in which the attached

NxPort is the destination of the connect-request.

This value is fixed at 0.

fcFxPortC1FbsyFrames The number of F_BSY frames generated by this F_Port against Class 1

connect-request.

This value is fixed at 0.

fcFxPortC1FrjtFrames The number of F_RJT frames generated by this F_Port against Class 1

connect-request.

This value is fixed at 0.

fcFxPortC1ConnTime The cumulative time that this F_Port has been engaged in Class 1 connection.

The amount of time of each connection is counted in octets from after a connect-

request has been accepted until the connection is disengaged, either by an EOFdt

or Link Reset.

This value is fixed at 0.

fcFxPortC1InFrames The number of Class 1 frames (other than Class 1 connect-request) received by

this F_Port from its attached NxPort.

This value is fixed at 0.

fcFxPortC1OutFrames The number of Class 1 frames (other than Class 1 connect-request) delivered

through this F_Port to its attached NxPort.

This value is fixed at 0.

EMC Connectrix DS-32M2 User Manual

Questions and Answers: