EMC Connectrix DS-32M2 - Configuring Zoning; Web Server Interface - Configure Zoning

C
C-18 Connectrix DS-32M2 User Guide
Configuring the Switch from a Web Server
Configuring Zoning
Zoning operations allow you to create, modify, and/or delete zones
and zone sets. (Refer to the Connectrix Manager User Guide for more
information on zoning.)
1. On the Configure window (Figure C-3 on page C-7), click the
Zoning tab.
This displays the window in Figure C-9.
Figure C-9 Web Server Interface — Configure Zoning
The information and prompts displayed on the Zone Set and Zones windows
are fairly self-explanatory.
2. On the Zone Set window you can add, delete (clear), or rename a
zone set, or enable/disable the default zone.
3. To add, delete, or modify a zone, click Zones to display a Zones
window (Figure C-10).