A
A-6 Connectrix DS-32M2 User Guide
Using SNMP to Manage the Switch
V6 MIB Support
The MIB files are provided in standard ASN.1 syntax and can be
installed into the MIB database of any SNMPv2-compliant Network
Management Station. The files are available for download from the
HTTP server of the Connectrix service processor.
FibreAlliance MIB V3.1 FibreAlliance MIB V3.1 (fcmgmt.mib) has not changed with the 6.0
release. The mappings of the following counters has been enhanced
to support 64 bits:
fcConnUnitPortStatC2RxFrames
fcConnUnitPortStatC2TxFrames
fcConnUnitPortStatC3RxFrames
fcConnUnitPortStatC3TxFrames
fcConnUnitPortStatC3Discards
fcConnUnitPortStatRxObjects
fcConnUnitPortStatTxObjects
fcConnUnitPortStatRxElements
fcConnUnitPortStatTxElements
In addition mapping enhancements were made to support 2 Gb/s
with the
fcConnUnitPortSpeed object.
This MIB is implemented by the SNMP agent that runs on the service
processor PC and in the ED-64M and DS-xxM products. Use the
Configure option in the Connectrix Manager application to configure
access to this MIB from authorized SNMP Network Management
Stations.
SNMP Framework MIB SNMP Framework MIB (snmp-framework.mib) is needed to
successfully compile and install the FibreAlliance MIB on the
Network Management Station.
No changes were made to this MIB with the 6.00 release.
Fibre Channel Fabric
Element MIB and
TCP/IP MIB-II
Fibre Channel Fabric Element MIB V1.10 April 24 2000 (fcfe.mib) and
standard TCP/IP MIB-II (rfc1213.mib) are implemented by the
SNMP agent that runs on the switch. Use the Configure option in the
corresponding Connectrix Product Manager to configure access to
these MIBs from authorized SNMP Network Management Stations.
Configuration must be done separately for each individual switch
requiring SNMP access.
No changes were made to this MIB with the 6.00 release.
ED-1032 Enterprise
MIB
ED-1032 Enterprise-specific MIB V1.7 (ed-1032.mib) is implemented
by the SNMP agent that runs on the ED-1032 Fibre Channel Director.
To Next Page
Loading...