EasyManuals Logo

EMC Connectrix DS-32M2 User Manual

EMC Connectrix DS-32M2
356 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #207 background imageLoading...
Page #207 background image
A
Fibre Channel Fabric Element MIB Support
A-21
Using SNMP to Manage the Switch
Capability Group
Table
The Fccfportcaptable displays the capabilities of the F_Port within
the fabric element.
Table A-10 Capability Group Table
Variable Provides
CapModuleIndex Module index.
FxPortIndex Port index.
FC-PHVersionHigh Highest or most recent version of FC-PH that the FxPort is capable of supporting.
FC-PHVersLow Lowest or earliest version of FC-PH that the F_Port is capable of supporting.
BBCreditMax Maximum number of receive buffers available for holding a Class 1 connect-request, or Class 2
or Class 3 frames from the attached N_Port.
BBCreditMin Minimum number of receive buffers available for holding a Class 1 connect-request, or Class 2 or
Class 3 frames from the attached N_Port.
RxDataFldSzMax Maximum size in bytes of the data field in a frame that the F_Port is capable of receiving from its
attached N_Port.
RxDataFldSzMin Minimum size in bytes of the data field in a frame that the F_Port is capable of receiving from its
attached N_Port.
Cos Value indicating the set of classes of service the F_Port is capable of supporting.
Intermix Flag indicating if the F_Port is capable of supporting the intermixing of Class 2 and Class 3
frames during a Class 1 connection. This flag is only valid if the port is capable of supporting
Class 1 service. Fixed at no (2).
StackedConMode Value indicating the mode of stacked connect request that the F_Port is capable of supporting.
Fixed at none (1).
C2SeqDelivery Flag indicating if the F_Port is capable of supporting Class 2 sequential delivery.
C3SeqDelivery Flag indicating whether or not the F_Port is capable of supporting Class 3 sequential delivery.
HoldTimeMax Maximum holding time (in microseconds) the F_Port is capable of supporting. (This variable is
not supported.)
HoldTimeMin Minimum holding time (in microseconds) the F_Port is capable of supporting. (This variable is
not supported.)
BaudRates Value indicating the set of baud rates the F_Port is capable of supporting.
Media Value indicating the set of media the F_Port is capable of supporting.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the EMC Connectrix DS-32M2 and is the answer not in the manual?

EMC Connectrix DS-32M2 Specifications

General IconGeneral
ModelConnectrix DS-32M2
TypeFiber Channel Switch
Ports32
Hot-swappableYes
Port Speed2 Gbps
ManagementWeb Tools, Command Line Interface (CLI), SNMP
Power SupplyDual redundant power supplies
Data Transfer Rate2 Gbps
Fabric OSFabric OS

Related product manuals