EMC Connectrix DS-32M2 - MIB Tree

A
A-4 Connectrix DS-32M2 User Guide
Using SNMP to Manage the Switch
Figure A-2 MIB Tree
Use the following SNMP commands with the MIB variables:
◆ get — Retrieves the value of variables at the agent.
◆ set — Sets the value of variables at the agent.
◆ trap — Notifies the management station of significant events.
Each group and variable in a MIB is assigned a numerical address.
You can enter commands with variables specified as a name or a
number. For example:
get {root, iso, org, dod, internet, mgmt, mib-2, system}
or
get {root, 1, 3, 6, 1, 2, 1, 1}
mgmt (2) experimental (3) private (4)
internet (1)
MIB-II
Fabric Element
MIB
DS-32M MIB
(ef-6000)