3
Using the Product Manager
3-5
Product Manager Overview
Using the Product Manager
This section provides a general overview of the Connectrix Manager
and its functions. For details on performing specific tasks and using
specific dialog boxes, refer to the appropriate chapters in this manual.
Using Dialog Boxes
Dialog boxes, such as the one in Figure 3-2, appear when you select
options from the pop-up menus.
The terms dialog box and window are sometimes used interchangeably.
Figure 3-2 Typical Dialog Box
To enter data into an empty field, click in the field and begin typing
when the cursor appears at insertion point.
To change or remove data that already exists in a field, drag the
cursor (or double-click on the data) to highlight the characters you
want to change/delete; then type in the new data. (It should
overwrite the highlighted characters; if not, use the
DELETE or
BACKSPACE key to remove characters.
To Next Page
Loading...