4
4-2
Connectrix DS-32M2 User Guide
Monitoring and Managing the Switch
Using the Hardware View
The Hardware view is the default view when you open the Product
Manager. Using this graphical view of the switch, you can view alert
symbols and simulated LEDs, display data, monitor status, and
obtain vital product information for the switch and its hardware
components.
To display the Hardware view from some other view in the Product
Manager, click the Hardware tab.
Identifying FRUs
Move the cursor over parts of the switch graphic in the Hardware
view to display pop-up labels identifying each hardware component
and its slot position in the chassis relative to identical components
installed in the switch.
FRUs include:
◆ Fan module — The DS-32M2 contains four fan modules.
◆ Power supply module — Note that each AC connector on the rear
of the unit is the location of an internal power supply.
◆ Ports (small form factor LC transceivers)
Monitoring Switch
Operation
This section describes the DS-32M2 Status table and status symbol
(shown below), which indicate the operating status of the switch:
Status Table
Status Symbol
ABC 123
ABC 123
To Next Page
Loading...