C
C-10 Connectrix DS-32M2 User Guide
Configuring the Switch from a Web Server
Configuring the Date and Time
The operation described here allows you to configure the effective
date and time for the switch. Refer to Configuring the Date and Time on
page 5-31 for information on performing this operation through the
Connectrix Manager.
1. On the Configure: Switch window (Figure C-4 on page C-8), click
Date/Time. This displays the window in Figure C-5.
Figure C-5 Web Server Interface — Configure Switch Date/Time
2. Click the Date fields that require changing, and enter numbers in
these ranges:
• Month (MM): 1 through 12
• Day (DD): 1 through 31
• Year (YYYY): greater than 1980
3. Click the Time fields that require changing, and enter numbers in
these ranges:
• Hour (HH): 0 through 23
• Minute (MM): 0 through 59
• Second (SS): 0 through 59
4. Click Activate to save the information.
To Next Page
Loading...