C
Configuring Switch Identification
C-9
Configuring the Switch from a Web Server
2. Configure the parameters as follows:
• Name — Up to 24 alphanumeric characters. Each
switch/director should be configured with a unique name.
This is necessary for directors on a LAN with DNS entries, and
it also will help in future identification and maintenance tasks.
If the switch is installed on a public LAN, the name should
reflect the switch’s Ethernet network DNS host name. For
example, if the DNS host name is DS-32M21.emc.com, enter
DS-32M21 in this dialog box.
• Description — Up to 255 alphanumeric characters.
• Location — Up to 255 alphanumeric characters.
• Contact person — Up to 255 alphanumeric characters.
3. Click Activate to save the information.
To Next Page
