EMC Connectrix DS-32M2 - Fibre Channel Fabric Element MIB Support; Fibre Channel Fabric Element MIB Supported

A
A-10 Connectrix DS-32M2 User Guide
Using SNMP to Manage the Switch
Fibre Channel Fabric Element MIB Support
Figure A-4 Fibre Channel Fabric Element MIB Supported
The Fibre Channel Fabric Element MIB enables users on network
management stations to monitor, control, and configure the switch
remotely using functions specifically for the DS-32M2. There are five
groups of variables defined and supported by the agent:
◆ Configuration (FcFeConfig)
◆ Operation (FcFeOp)
◆ Error (FcFeError)
◆ Accounting (FcFeAcct)
◆ Capability (FcFeCap)
The following sections define the Fibre Channel Fabric Element MIB
variables and their output. All variables are in the Fibre Channel
Fabric Element MIB, except for
fcFxPortPhysAdminStatus which is
defined under
fcFxPortPhysTable in the fcFeOp group, are
read-only.
fcFeError (3)fcFeOp (2) fcFeAcct (4) fcFeCap (5)fcConfig (1)
fcFe (1)
fcFabric (2)
fibre channel
(42)
experimental
(3)