A
Fibre Channel Fabric Element MIB Support
A-13
Using SNMP to Manage the Switch
Accounting: Class 2
The Fcfportc2accttable contains Class 2 accounting information for
each F_Port in the fabric element recorded since the management
agent initialized.
Table A-3 Accounting: Class 2
Variable Description
fcFxPortC2AcctModuleIndex This object identifies the module containing the F_Port for which this entry contains
information. This number ranges from 1 to AS_glob.prod_cnfg_ptr->max_nbr_modules.
fcFxPortC2AcctFxPortIndex This object identifies the F_Port within the module. This number ranges from 1 to the
value of fcFeModulePortCapacity for the associated module. The value remains
constant for the identified F_Port until the module is re-initialized. This number ranges
from 1 to AS_glob.prod_cnfg_ptr->ports_per_module.
fcFxPortC2InFrames The number of Class 2 frames received by this F_Port from its attached NxPort.
fcFxPortC2OutFrames The number of Class 2 frames delivered through this F_Port to its attached NxPort.
fcFxPortC2InOctets The number of Class 2 frame octets, including the frame delimiters, received by this
F_Port from its attached NxPort.
fcFxPortC2OutOctets The number of Class 2 frame octets, including the frame delimiters, delivered through
this F_Port to its attached NxPort.
fcFxPortC2Discards The number of Class 2 frames discarded by this F_Port.
This value is not supported. It’s always zero.
fcFxPortC2FbsyFrames The number of F_BSY frames generated by this F_Port against Class 2 frames.
fcFxPortC2FrjtFrames The number of F_RJT frames generated by this F_Port against Class 2 frames.
To Next Page
Loading...
Need help?
General
