6
6-12
Connectrix DS-32M2 User Guide
Using Logs
◆ Utilization % — Percent usage of traffic capacity. This is the
percent of the port’s throughput capacity achieved by the
measured throughput. This setting constitutes the threshold
value and is configured through the Configure Threshold Alerts
window. For example, a value of 25 means that threshold occurs
when throughput reaches 25 percent of the port’s capacity.
◆ Alert Time — The maximum cumulative time that the
throughput threshold percentage must exist before an alert is
generated. This is set through the Configure Threshold Alerts
window.
◆ Interval — The time interval during which the throughput is
measured and an alert can generate. This is set through the
Configure Threshold Alerts window.