6
Event Log
6-7
Using Logs
Event codes include:
◆ Description — A short description of the event.
◆ Severity — A class of severity that identfies the importance of the
event:
◆ FRU-Position — (if applicable) An acronym representing the
FRU type followed by a number representing the FRU chassis
position. (Moving the cursor across the FRUs in the Hardware
View displays the position numbers.)
◆ Event Data — Up to 32 bytes of supplementary information for
the event in hexadecimal format.
000 – 199 System events
200 – 299 Power supply events
300 – 399 Fan module events
400 – 499 CTP events
500 – 599 Port events
0 = Informational
2 = Minor
3 = Major
4 = Severe (not operational)
CTP = Control processor
FAN = Single fan module
PWR = Power supply module
To Next Page
