Connectrix DS-32M2 User Guide
xxiii
Warnings and Cautions
Static Precautions EMC incorporates state-of-the-art technology in its designs, including
the use of LSI and VLSI components. These chips are very susceptible
to damage caused by static discharge and need to be handled
accordingly.
CAUTION
!
Before handling any equipment containing LSI and/or VLSI
components, observe the following precautions:
◆ Store all printed circuit boards in anti-static bags.
◆ Use a ground strap whenever you handle a printed circuit
board.
◆ Unless specifically designed for non-disruptive replacement,
never plug or unplug printed circuit boards with the power on.
Severe component damage may result.
To Next Page
Loading...