EMC Connectrix DS-32M2 - Page 290

D
D-42 Connectrix DS-32M2 User Guide
Command Line Interface
config.zoning.addWwnMem
Syntax addWwnMem “zoneName” wwn
Purpose This command adds a World Wide Name zone member to the
specified zone in the work area.
Description The CLI supports the number of zones members per zone specified
for a given product.
Parameters This command has two parameters.
Command Example
Root> config zoning addWwnMem TheUltimateZone
10:00:00:00:C9:22:9B:64
config.zoning.addPortMem
Syntax addPortMem “zoneName” domainId portNumber
Purpose This command adds the domain ID and port number of a zone
member to the specified zone in the work area.
Description The CLI supports the number of zones members per zone specified
for a given product.
Parameters This command has one parameter.
zoneName
Specifies the name of the zone.
wwn
The World Wide Name of the member to be
added to the zone. The value of the WWN must
be in colon-delimited hexidecimal notation (for
example, AA:00:AA:00:AA:00:AA:00).
zoneName
Specifies the name of the zone.
domainId
Specifies the domain ID of the member to be
added to the zone. Valid values are integers
1 through 31.
portNumber
Specifies the port number of the member to be
added to the zone. Valid port number values for
the DS-32M2 are 0 through 31.