EMC Connectrix DS-32M2 - Page 300

D
D-52 Connectrix DS-32M2 User Guide
Command Line Interface
Command Example Root> perf class3 2
Output The port Class 3 counter data is displayed as a table that includes the
following properties.
◆ Port — The port number.
◆ Rx Frames — The number of Fibre Channel Class 3 frames the
port has received.
◆ Tx Frames — The number of Fibre Channel Class 3 frames the
port has transmitted.
◆ Rx Words — The number of Class 3 4-byte words within frames
the port has received.
◆ TX Words — The number of Class 3 4-byte words within frames
the port has transmitted.
◆ Disc Frames — The number of Class 3 frames that have been
discarded upon receipt by this port. There are no FBSYs or FRJTs
generated for Class 3 frames.
Output Example The output from perf.class3 is similar to the following:
Port 2
Statistic Count Wrap
----------- ---------- ----------
RxFrames 2953184 23
TxFrames 1842953 12
RxWords 2953184 65
TxWords 1842953 32
Disc Frames 2953184 26
perf.clearStats
Syntax clearStats portNumber
Purpose This command resets all port statistics for an individual port or for all
ports.
Parameters This command has one parameter.
Command Example
Root> perf clearStats 4
portNumber
Specifies the port number to be reset. Valid
values for the DS-32M2 are 0 through 31.