EMC Connectrix DS-32M2 - Page 315

D
perfshow
D-67
Command Line Interface
Output Example The output from show.port.status is similar to the following:
Port State Type Attached WWN Beaconing Reason
---- ---------------- ----- ----------------------- --------- ------
0 Online fPort 10:00:80:00:11:22:33:44 false
1 Online gPort 10:00:80:00:11:22:33:45 true
2 No Light fPort 10:00:80:00:11:22:33:55 true
3 Offline ePort 10:00:80:00:11:22:33:00 false
4 Online gPort 10:00:80:00:11:22:33:57 false
5 Port Failure fPort 10:00:80:00:11:22:33:46 false
6 Link Reset gPort 10:00:80:00:11:22:33:63 false
7 Segmented E_Port ePort 10:00:80:00:11:22:33:47 false 2
8 Online ePort 10:00:80:00:11:22:33:88 false
9 Offline fPort 10:00:80:00:11:22:33:49 false
10 Inactive ePort 10:00:80:00:11:22:33:50 false 3
11 Online fPort 10:00:80:00:11:22:33:53 false
12 No Light fPort 10:00:80:00:11:22:33:56 false
13 Online fPort 10:00:80:00:11:22:33:59 false
14 Invalid Attachment fPort 10:00:80:00:11:22:33:64 false 7
15 Online fPort 10:00:80:00:11:22:33:66 false
2: Duplicate Domain ID(s)
3: Switch Speed Conflict
7: ISL connection not allowed on this port
show.port.technology
Syntax technology
Purpose This command displays port technology information for all ports.
Parameters This command has no parameters.
Command Example
Root> show port technology
Output The port technology data is displayed as a table that includes the
following properties.
◆ Port — The port number.
◆ Connectr — The port connector type (LC, MT_RJ, MU, Internal).
◆ Transcvr — The transceiver type (Long LC, Short, Short OFC,
Long LL, Long Dist).
◆ Distance — The distances supported (Short, Intermediate, Long,
Very Long).