4
4-24
Connectrix DS-32M2 User Guide
Monitoring and Managing the Switch
and appears to be blocked to all other communication. If the
checkbox is checked, channel wrap is enabled. Click the checkbox
to add or remove a checkmark.
◆ Swap Ports (S/390 mode only) — Refer to Swapping Ports on
page 7-3.
◆ Clear Link Incident Alert — Refer to Port Menu on page 4-14.
◆ Reset Port — Refer to Port Menu on page 4-14.
◆ Port Binding — Allows you to enable or disable port binding. For
details, refer to Configuring Ports on page 5-11.
◆ Clear Threshold Alert(s) — Allows you to clear threshold alerts.
Select the appropriate option to clear alerts for the selected port
only or all ports on the director. This clears all attention indicators
that notify users of threshold alerts in dialog boxes and views.
This action also restarts the notification interval and the
cumulative minutes for utilization % interval.
Figure 4-6 Clear Threshold Alert(s) Window
For more information on threshold alerts, refer to Configuring
Threshold Alerts on page 5-33.
To Next Page
Loading...