FOR RESTRICTED USE only Fargo Electronics, Inc.
DTC550 Direct to Card Printer/Encoder User Guide (Rev. 2.8)
7-42
Rebooting the Printer (DTC550 only)
The Reboot page allows the DTC550 User to reboot or reset the Printer and/or enter the
upgrade mode.
Step Procedure
1 Select the Administration link.
2 Log in as a root User (using the old password) if you are so prompted.
(Note: Any change of setting will only be accepted after you have
successfully logged in.)
3 Select the Reboot link.
4 Select the Reboot button.
5 Click Yes when prompted.
6 Wait for the Printer to reboot and display the home page. See the
Reviewing the DTC550 Home Page
display.
To Next Page
Loading...
Need help?
General
