Fargo DTC550 - Using the Magnetic Track Options

FOR RESTRICTED USE only Fargo Electronics, Inc.
DTC550 Direct to Card Printer/Encoder User Guide (Rev. 2.8)
6-52
Using the Magnetic Track Options
Use the Magnetic Track options for these purposes:
• Customize the ISO encoded data format for each of the Magnetic Stripe's three
tracks.
• Customize each track independently of the other two.
• Specify which of the three tracks to customize by selecting one of the three track
options.)
(Note #1: After making the required selection, the Magnetic Track options box displays
the current set of customization options for the selected track.)
(Note #2: For most applications, the default settings for these options do not need to be
changed.)