Fargo DTC550 - Reviewing the Printer Settings Self-Test; Reviewing the Magnetic Test Option

FOR RESTRICTED USE only Fargo Electronics, Inc.
DTC550 Direct to Card Printer/Encoder User Guide (Rev. 2.8)
4-56
Reviewing the Printer Settings Self-Test
Step Procedure
1 Use this card to view Printer settings and counts for Card Count (CC),
Pass Count (PC), Card Cleaning Count (TC) and others.
The Card Count is the total number of cards the Printer has produced.
Pass Count is the total number of print passes made by the Printhead.
(Note: A pass is measured each time a single Ribbon panel is printed or
passes beneath the Printhead.)
Reviewing the Magnetic Test option
Step Procedure
1 Use this option only if a Magnetic Encoding module is installed in the
Printer. (Note: The Printer will feed, encode and eject a card. Be sure to
have high Coercivity cards installed when running this test.)