Fargo DTC550 - Using the Character Size Radio Buttons

FOR RESTRICTED USE only Fargo Electronics, Inc.
DTC550 Direct to Card Printer/Encoder User Guide (Rev. 2.8)
6-54
Using the Character Size radio buttons
Use this option to customize the Character Data Size (Bits per Character) used to
encode the magnetic data on the currently selected track. (Note: This character size
includes the parity bit (if enabled).)
Step Procedure
1
• Select 5 Bits to change the bits per character to 5 BPC.
OR
• Select 7 Bits to change the bits per character to 7 BPC.
OR
• Select 8 Bits to change the bits per character to 8 BPC.