FOR RESTRICTED USE only Fargo Electronics, Inc.
DTC550 Direct to Card Printer/Encoder User Guide (Rev. 2.8)
4-31
Resolving the Ribbon Jam/Broken Error Message
Symptom: An error message is displayed on the LCD and the Ribbon is broken.
Step Procedure
1 Verify that the Print TOF and Print EOF are set correctly.
If the break occurs at the front portion of the Ribbon Color Panel, increase
the Print TOF by 5.
If the break occurs at the back portion of the Color Panel, reduce the Print
EOF by 5.
Print a self-test to verify operation. See the Printing a Test Print Image
.