Fargo DTC550 - Using the Bit Density Radio Buttons

FOR RESTRICTED USE only Fargo Electronics, Inc.
DTC550 Direct to Card Printer/Encoder User Guide (Rev. 2.8)
6-53
Using the Bit Density radio buttons
Use this option to customize the Bit Recording Density (Bits per Inch) used to encode
the magnetic data on the currently selected track. The default ISO Standard selections
for this option are as follows:
Step Procedure
1
• Select 75 BPI to change the bits per inch to 75 BPI.
OR
• Select 128 BPI to change the bits per inch to 128 BPI.
OR
• Select 210 BPI to change the bits per inch to 210 BPI.