Fargo DTC550 - Reviewing the Telnet Command Table

FOR RESTRICTED USE only Fargo Electronics, Inc.
DTC550 Direct to Card Printer/Encoder User Guide (Rev. 2.8)
7-7
Reviewing the Telnet Command Table
The following table describes available Telnet commands. (Note: You can enter partial
full-word commands: the Printer will respond with additional help. For example, you can
enter “list”, and the Printer will respond with all subcommands to the list command.)
Telnet Command Command Purpose Command Format
?
help
Display help for Telnet
commands.
?
reset
Reset the Ethernet interface
for the DTC550
printer/encoder.
reset
ping
Send a ping command to
another IP address as a test
of the Ethernet interface.
ping <IPADDR>