Fargo DTC550 - Resolving the Cut off or Off-Center Card Image Problems

FOR RESTRICTED USE only Fargo Electronics, Inc.
DTC550 Direct to Card Printer/Encoder User Guide (Rev. 2.8)
4-51
Resolving the cut off or off-center Card Image problems
Symptom: The printing is cut off or is not centered on the card. This causes a white
border to appear on the card, as shown below.
Step Procedure
1 Use the Image Position within the Calibrate tab of the Printer Driver to
precisely center the image. See Displays A and B (below).
Display A - Centering the Image correctly