Fargo DTC550 - Adjusting for the Ribbon Type Option

FOR RESTRICTED USE only Fargo Electronics, Inc.
DTC550 Direct to Card Printer/Encoder User Guide (Rev. 2.8)
6-15
Adjusting for the Ribbon Type option
Use the Ribbon Type dropdown menu to match the Ribbon type.
Step Procedure
1 Adjust to match the Ribbon Type selection with the Ribbon Type already
loaded in the Printer.
• YMCKO: Yellow, Magenta, Cyan, Resin Black, Overlay
OR
• YMCKOK: Yellow, Magenta, Cyan, Resin Black, Overlay, Resin Black
OR
• KO Resin: Black, Overlay
OR
• K: Standard or Premium Resin
OR
• Colored Resin: Colored Resin is available in Red, Blue, Green or White
OR
• Metallic Resin: Metallic Resin is available in Gold or Silver
OR
• YMCFKO: Yellow, Magenta, Cyan, Fluorescing, Resin Black, Overlay
OR
• YMCFKOK: Yellow, Magenta, Cyan, Fluorescing, Resin Black, Overlay,
Resin Black