Fargo DTC550 - Logging in

FOR RESTRICTED USE only Fargo Electronics, Inc.
DTC550 Direct to Card Printer/Encoder User Guide (Rev. 2.8)
7-14
Logging In
When a User attempts to change any setting, they are asked for a User name and
password. (Note: The Guest Users can only view settings.)
Step Procedure
1 Enter the correct User name:
• The default administrative User name is root.
• The default non-administrative User name is guest.
• Non-administrative Users can only view settings.
2 Enter the correct password:
• The default password is an empty string. If the password has not been
changed, leave the field blank.
• See Password page procedure for changing passwords.
3 Press Enter or click on the OK button.
4 If the name and password is not accepted, another login prompt will appear
on screen.
Repeat this procedure with the correct User name and password.