FOR RESTRICTED USE only Fargo Electronics, Inc.
DTC550 Direct to Card Printer/Encoder User Guide (Rev. 2.8)
2-3
Technical Specifications
Term Description
Accepted
Standard Card
Sizes
CR-80 (3.370"L x 2.125"W / 85.6mmL x 54mmW)
CR-79 Adhesive Back (3.303"L x 2.051"W / 83.9mmL x
52.1mmW)
Accepted Card
Thickness
• Print only: .020" (20 mil) to .050" (50 mil) / .508mm to
1.27mm(single-sided printing only for 50 mil cards)
• Print/Lamination: .030" (30 mil) to .040" (40 mil) / .762mm
to 1.02mm
Accepted Card
Types
PVC or polyester cards with polished PVC finish; monochrome
resin required for 100% polyester cards; optical memory cards
with PVC finish
Accepted Card
Compositions
PVC or polyester cards with polished PVC finish; monochrome
resin required for 100% polyester cards.
Agency Listing
• Safety: UL IEC 60950-1 (2001), CSA C22.2 No. 60950-1-03
• EMC: CE, FCC, CRC c1374, EN 55022 Class A, FCC Class
A, EN 55024: 1998, EN 61000-3-2 and EN 61000-3-3
Available only
with Print
Security
Package:
• Full-color with fluorescing, resin black and overlay panel,
YMCFKO*, 400 prints
• Full-color with fluorescing, two resin black panels and overlay
panel, YMCFKOK*, 350 prints
Barcodes PVC or polyester cards with polished PVC finish; monochrome
resin required for 100% polyester cards.
Input Hopper
Card Capacity
DTC550: Dual-stack Hopper, 200 cards (30 mil); auto or manual
feed
Output Hopper
Card Capacity
100 cards (30 mil)
Card Cleaning Removable Card Cleaning Cartridge with replaceable cleaning
roller
To Next Page
Loading...
