Fargo DTC550 - Firmware Errors; Resolving the Update Firmware Now; Resolving an Upgrade Failed Error

FOR RESTRICTED USE only Fargo Electronics, Inc.
DTC550 Direct to Card Printer/Encoder User Guide (Rev. 2.8)
4-36
Firmware Errors
Resolving the Update Firmware Now
The System Firmware must be updated for one of these reasons:
• The previous Firmware update was unsuccessful.
• The program data is corrupt.
• The Printer model does not correspond with the installed Firmware model number.
• The revision number of the Firmware does not match on all system components.
Resolving an Upgrade Failed error
Symptom: An Upgrade Failed error is displayed on the LCD during the upgrade
process
Step Procedure
1 Determine if there is interference from an external device.
2 Ensure that the proper procedure is being used.