Fargo DTC550 - Reviewing the Color;Resin YMCK Self-Test; Reviewing the Color Bars YMC Self-Test

FOR RESTRICTED USE only Fargo Electronics, Inc.
DTC550 Direct to Card Printer/Encoder User Guide (Rev. 2.8)
4-55
Reviewing the Color/Resin YMCK Self-Test
Step Procedure
1 Use this card to determine Image Placement and confirm that (a) the image
colors are properly reproduced and (b) the Resin Panel is printing properly.
(Note: The Image consists of twelve spot colors, YMC and RGB, as well as
gray density bars and thin resin lines.)
Reviewing the Color Bars YMC Self-Test
Step Procedure
1 Use this card to confirm that image colors are properly reproduced. Image
consists of sixteen graduated steps of RGB and YMCK. (Note: This print will
provide maximum image size, giving complete card coverage on a CR-80
sized card.)