FOR RESTRICTED USE only Fargo Electronics, Inc.
DTC550 Direct to Card Printer/Encoder User Guide (Rev. 2.8)
6-20
Using the Split 1 Set of Ribbon Panels option
Use this option to provide the most economical means of printing a dual-sided card since
a single set of Ribbon panels is essentially split to print both the front and backsides of a
card.
Step Procedure
1 Select this option to automatically print full-color (on the front of a card)
and resin black (on the back of a card), using either of the Full-Color
YMCKO or YMCKOK Print Ribbons.
• YMCKO Ribbon type usage: The front of the card is printed with the
Ribbon's YMC and O panels and the back is printed with the K panel.
• YMCKOK Ribbon type usage: The front of the card is printed with
the YMCKO panels and the back is printed with the second K panel.
• YMCFKO Ribbon type usage: The front of the card is printed with
the Ribbon's YMCF and O panels and the back is printed with the K
panel.
• YMCFKOK Ribbon type usage: The front of the card is printed with
the YMCFKO panels and the back is printed with the second K panel.
(Note #1: This option is automatically enabled when the YMCKOK or
YMCFKOK Ribbon type is selected.)
(Note #2: The Print Both Sides option is automatically enabled when this
option is selected.)
To Next Page
Loading...
