Fargo DTC550 - Accessing the IP Address of Your Printer; Accessing the DTC550 IP Address

FOR RESTRICTED USE only Fargo Electronics, Inc.
DTC550 Direct to Card Printer/Encoder User Guide (Rev. 2.8)
7-58
Accessing the IP address of your Printer
The additional LCD menus for Ethernet-enabled Printers are provided to view the IP
address of the Printer. Follow these procedures to access the IP Address of your Printer
model.
Accessing the DTC550 IP address
Step Procedure
1 Apply power to the Printer.
2 Ensure that the Printer is connected to your network.
3 Wait up to one (1) minute to allow the Printer to configure the IP address.
4 Select MENU on the LCD.
5 Select System Info on the LCD.
6 Select the down arrow on the LCD to highlight the Network Info menu
entry.
7 Select Network Info on the LCD.
8 Select down arrow on the LCD to highlight the IP: menu entry.
9 View the IP address displayed as a dotted quad number.
Example: IP: 168.192.1.1