Fargo DTC550 - Measuring the Total Card Area

FOR RESTRICTED USE only Fargo Electronics, Inc.
DTC550 Direct to Card Printer/Encoder User Guide (Rev. 2.8)
6-91
Measuring the Total Card area
Step Procedure
1 Determine the area of the card to define. (Note: This area is indicated by the
dashed outline, as shown below. The easiest way to determine the size of this
area is to actually print a card and look at it in the same orientation as when it
exits the Printer.)
2 Measure the total area and enter those dimensions into the Dimension boxes,
as shown below.