Fargo DTC550 - Setting the Printhead Resistance

FOR RESTRICTED USE only Fargo Electronics, Inc.
DTC550 Direct to Card Printer/Encoder User Guide (Rev. 2.8)
11-20
Setting the Printhead Resistance
Step Procedure
1 Locate the Printhead Setting Number on the bottom of the Printhead.
The number reads R=XXXX.
2 Select MENU, Setup Printer, Print Settings and Printhead Resistance.
Enter the given value for the Printhead.
3 Press the DONE button to save the value. Press YES when asked to save
the change.