Fargo DTC550 User Manual

FOR RESTRICTED USE only Fargo Electronics, Inc.
DTC550 Direct to Card Printer/Encoder User Guide (Rev. 2.8)
6-23
Using the Rotate Front by 180 Degrees option
Use this option to change the position of the printed image in relation to the set location
of a card's Magnetic Stripe or smart chip.
Step Procedure
1 Select the Rotate Front 180 Degrees option to rotate the image on the
front of the card by 180 degrees when printed.

Fargo DTC550 Specifications

General

Brand	Fargo
Model	DTC550
Category	Printer
Language	English