Fargo DTC550 - Using the ASCII Offset Radio Buttons

FOR RESTRICTED USE only Fargo Electronics, Inc.
DTC550 Direct to Card Printer/Encoder User Guide (Rev. 2.8)
6-55
Using the ASCII Offset radio buttons
Use this option to customize the Character ASCII Offset used to encode the magnetic
data on the currently selected track. (Note: This character-offset value is subtracted
from the ASCII value of each Magnetic Stripe data character prior to encoding on the
track.)
Step Procedure
1
• Select NULL to change the ASCII Offset to NULL.
OR
• Select SPACE to change the ASCII Offset to SPACE.
OR
• Select ZERO to change the ASCII Offset to ZERO.