FOR RESTRICTED USE only Fargo Electronics, Inc.
DTC550 Direct to Card Printer/Encoder User Guide (Rev. 2.8)
8-2
Cleaning the Printhead (D855055)
Caution: Perform this procedure during every Ribbon change or after every
1,000 prints to maintain consistent print quality. Perform this procedure for streaks on
the card where the color was not transferred correctly.
Step Procedure
1 Open the Printer's Top Cover and Print Station.
2 Using a Printhead Cleaning Pen from the Printer Cleaning Kit, firmly wipe back
and forth across the surface of the Printhead.
3 Once the Printhead is completely dry, close the Printer.
4 If a streak persists, replace the Printhead Assembly (D855055).