FOR RESTRICTED USE only Fargo Electronics, Inc.
DTC550 Direct to Card Printer/Encoder User Guide (Rev. 2.8)
3-45
Printer Transport
Moving the Printer to another location
Step Procedure
1 The Printer should be transported by at least two persons who can safely lift
it onto a nearby cart with rollers and then carefully transport it to a
designated location. See below.
Please see your supervisor to determine who can safely lift the Printer in
order to relocate it. Use caution because of the weight of the Printer.
2
You have completed the setup and installation procedures in this
section.
To Next Page
Loading...
