Fargo DTC550 - Showing the Card Count; Selecting the System Upgrade (Firmware Upgrade)

FOR RESTRICTED USE only Fargo Electronics, Inc.
DTC550 Direct to Card Printer/Encoder User Guide (Rev. 2.8)
11-28
Showing the Card Count
Step Procedure
1 Choose SHOW CARD COUNT to view counts for Card Count (CC) and
Pass Count (PC).
OR
Select the Menu > System Info > Show Card Count.
• Card Count is the total number of cards the Printer has produced.
• Pass Count is the total number of print passes made by the Printhead.
(Note: A pass is measured each time a single Ribbon panel is printed
or passes beneath the Printhead.)
Selecting the System Upgrade (Firmware Upgrade)
This option is used to upgrade the Printer Firmware.
Step Procedure
1 Perform the upgrade by selecting Menu and then SYSTEM UPGRADE.
The LCD will prompt: Are you sure you want to continue?
2 Select YES to begin the System Upgrade.
OR
Select NO to return to the SELECT FUNCTION screen.