Fargo DTC550 - Adjusting for the Resin Dither

FOR RESTRICTED USE only Fargo Electronics, Inc.
DTC550 Direct to Card Printer/Encoder User Guide (Rev. 2.8)
6-18
Adjusting for the Resin Dither
Use the appropriate Dither method according to the type of image to be printed. (Note:
This option only affects those objects printed with the resin black panel.)
Step Procedure
1 Select Optimized for Graphics when printing lower quality images (e.g.,
clipart, logos, etc.) with resin.
OR
Select Optimized for Photo when printing photo quality images with resin.