Fargo DTC550 - Selecting the Undefined Area(S) with the K Panel Resin Tab

FOR RESTRICTED USE only Fargo Electronics, Inc.
DTC550 Direct to Card Printer/Encoder User Guide (Rev. 2.8)
6-89
Selecting the Undefined Area(s) with the K Panel Resin tab
Step Procedure
1 Select the Undefined Area(s) option to print the resin black (K) panel for all
black found only in the space outside the areas defined, as shown below.
(Note: In the card grid, black indicates the area in which the resin black (K)
panel will be printed.)